Hang Doors Easy Peasy with the Trend 2-Piece Hinge Jig

In this video, Skill Builder takes a look at the Trend 2-Piece Hinge Jig, a portable template set designed for recessing hinges in wooden doors & frames.

Key features of the product include:

– It is easy to use with minimal setting-up time, completing the job both accurately & quickly.

– Used on-site & in joinery shops to increase productivity with excellent results.

– Four apertures for fire door requirements.

– No need for marking out in the conventional way.

– Quick & simple to set-up as the hinge is used as the pattern.

– Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.

– Can be used on both inside and outside doors.

– Use with a light duty plunge router with 1/4 inch collet.

– Long reach router cutter required, 12mm diameter with 70mm overall length.

– Angled position slots to prevent creep.

– Unibase may be needed.

– T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

Find out more about Trend at https://www.trend-uk.com.

About Roger Bisby

Roger Bisby is an English television presenter and journalist, known for his expertise in the British building industry.

Check Also

how did british gas miss this simple fault youtube thumbnail

How Did British Gas Miss This Simple Fault?

📪 Newsletter: http://skill-builder.uk/signup Roger helps his neighbour figure out a fault the British Gas engineer …