How to Silicone Seal Tips with Cramer Fugi 5 Kit

Jubi shows us how to apply silicone sealant in the bathroom, around the bathtub, along the basin unit, toilet and the mirrored shelf with the Cramer Fugi 5 Kit and some washing up liquid.

Managing Silicone

This multifunctional tool can be used for many flexible sealants and caulks.

Application of masking tape and cleaning afterwards is no longer necessary if you can develop the knack of using this kit.

Due to the design of the FUGI there is no need to use a releasing agent and the desired form of sealing can be applied without leaving a greasy film.

Mistakes can be repaired by simply re-grouting, however, this works only if the sealing-grout/caulk has not yet bonded (Cellulite-skin surface).

Controlled Flexibility

All pastes, silicone, acrylic and polyurethane can be applied as a sealant, and flexible grouts are able to be formed with the FUGI paying attention to the Manufacturer’s instructions.

By holding the FUGI so that it fits seamlessly to the wall and floor, slight pressure is applied so the flexible cutting edges fit well into the wall angle. Always use the absolutely smooth edge for spreading.

Work step by step, by only doing short distances. Should the sealant go above the FUGI, stop spreading, and clean FUGI with a household paper towel.

Cramer Fugi 5 Kit

Cramer Fugi 5 Kit

The FUGI Toolkit presents the professional solution for all different kinds of joints. Added to that, this unique toolkit enables you to render perfect joints without the use of soapy water.

The FUGI can be used on all smooth, rough or wave-like surfaces. When working on uneven surfaces push a little harder onto flexible edges.

Cramer Fugi 5 Kit Grouting & Silicone Profiling & Applicator Tool Kit
  • For easy use of flexible sealants and caulks
  • A releasing agent (soapy water) is not needed to apply the soft caulking mass (silicone)
  • Professional profiles only in 3 steps

Cramer Fugi 5 Kit is supplied with:

  • 5 Tools – 16 different ways of use
  • 1 x 180°C angle
  • 1 x 90°C angle
  • 4 x 45°C angle (16, 10, 8, 5mm)
  • 3 x concave grooves (r = 5, 10, 15mm)
  • 7 x convex shapes (30, 25, 20, 15, 10, 8, 6 x 3mm)
  • Swallow-tail tool for tight corners and hard to reach areas

See more on silicone sealing on Skill Builder.

Check out the official Cramer website.

About Dylan Garton

Dylan Garton is a co-founder, video producer and editor for the Skill Builder social media platforms.

Check Also

how did british gas miss this simple fault youtube thumbnail

How Did British Gas Miss This Simple Fault?

📪 Newsletter: http://skill-builder.uk/signup Roger helps his neighbour figure out a fault the British Gas engineer …