Videos

Steve goes to Sussex Installations to get his Vivaro pimped out like Roger's to prevent the dreaded tool theft which is getting out of hand.

Follow us on Facebook https://facebook.com/skillbuilderchannel #Milestones #Thanks #Gratitude ================================================= Skill Builder Link Tree: https://linktr.ee/skillbuilder Tell us what you like: http://skill-builder.uk/vote Get in touch, send us your pictures and videos: http://skill-builder.uk/send Twitter: https://twitter.com/skillbuilderuk Out of respect to our channel sponsors and the wide variety of people who watch our videos, we will remove comments that do not follow common standards of …

Do you know how to saw wood and get a nice crisp perfect edge? Robin Clevett shares his wood sawing expertise gathered from his 30 years of joinery.

How to build a garden room episode 4 gets our room weathered in. Robin finishes the roof construction and PIR board while Andy gets the Easy Trim Vista Breather Membrane on ready for the slates.

The Pnu-Point Pointing Tool video is one of our first product reviews which we produced back in 2003. A great mortar gun powered by low-pressure compressed air (32 psi/2 bar), the tool has no moving parts, so nothing to go wrong as long as you keep the tool clean. Buy this pointing gun online at the Pnu-Point shop: http://shop.pnupoint.co.uk For …

Repointing old Victorian brickwork is a job Roger loves. In this video, he shows you his technique and the tools he recommends for pointing, see the list below.

How to remove the mortar between bricks the easy way with Morta Sortas Diamond Coated Mortar Rake and Crosshead TCT Tipped Masonry Drill.

A look back at 2006, after a long break, we have another episode of the 35A extension series, the first project that Team SB worked on together.

Roger spots Reigate Plasterers working on some sand and cement rendering and jumps up the scaffold to say hello.

The Roofus square carpentry tool, a game-changing product for carpentry, steel fabrication and roof construction. The movable ruler can be positioned at any angle, allowing for vertical and horizontal levelling.

We've seen Robin ordering his doors from XL Joinery, now you can see him hang them as the Capel Build gets closer to the finish line.

Roger & Phil replace an old Glow Worm boiler with a Baxi Platinum 40 and Google Nest Thermostat E for an energy-efficient system.

With the help of our tool sponsor Milwaukee, it’s time for Robin’s favourite part of any build and that’s pitching the roof. This series shows you how to build a garden room from scratch for your man cave, garden office or summer house. #SBGardenRoom #MilwaukeeTools #RobinClevett

How to cut a hip rafter with Robin Clevett using the direct measurement method.

Breaking out the back end gives them some fresh air, perhaps a little too fresh when the storm blew in.

How to build a timber frame garden room episode 2 sees the walls go up and get secured into place by the Skill Builder team.

Dash cam review looking at the best dashcams, the cheapest models against the high-end ones, from £17 right up to £700. Which one should you buy? Watch our buying guide with Dylan Garton.

Thanks to Tom for sending us his video of easily one of the worst bathroom installation we have ever seen. We have seen plenty of DIY bathroom installations that are way better than this.

Robin shows you how to install Thermowood exterior cladding at the Capel Build with some little tricks and tips including some preparation work with the HB42 Eco-foil ’All-in-One’ sealant and adhesive.

James is completing the blockwork at the rear of the house and Ian is fitting the windows in Part 4 of the King Build.