DIY Wall-Hung Toilet — Essentials to Know First!

OUR BEST EVER VIDEO 👇
https://youtu.be/NwB8cxZlZTw

Abacus Wall-Hung Toilet 👇
https://www.abacus-bathrooms.co.uk/#!/sanitaryware-furniture/wcs/wall-hung-wcs

________________________

WALL-HUNG TOILET FITTING STEPS

Prep the Wall and Space: Begin by checking the wall where the toilet will be mounted. Make sure all necessary connections (water and waste pipes) are in place and correctly aligned.

Add Silicon to Flush Pipe: Apply a small amount of silicon to the flush pipe connection to ensure it fits snugly. This helps reduce friction and prevents leaks. A small pot of silicon (though costly) is recommended for a secure fit.

Adjust Pipe Length: Measure and trim the pipe carefully to ensure it fits precisely. Roger recommends subtracting around 8mm from the measurement to avoid future issues when tightening the pan to the wall. Trim slightly more if necessary to prevent the pipe from dislodging when pressure is applied.

Remove Burs: After cutting the pipe, file down any rough edges or burs, especially on the inside. Use a small file or knife to smooth the surface completely to avoid damaging the connection.

Test Fit the Pipe: Insert the pipe into the fitting to ensure it goes in smoothly and aligns correctly with the toilet. Mark where the pipe meets the tile to help with placement.

Position the Studs and Grub Screws: Measure the distance from the wall (usually around 35mm) and install the studs accordingly. Place the grub screws into position, and as you adjust them, they’ll pull the pan snugly toward the wall.

Final Adjustments: Insert the Allen keys into the grub screws to tighten the pan. Once the pan is levelled and stable, apply a final bead of silicon along the back edge to keep it securely in place.

Inspect for Stability: Check that the toilet is mounted securely and aligned perfectly with the wall. If everything looks good, your wall-hung toilet is ready for use!

Abacus Wall-Hung Toilet & Basin