Weber floor fibre flow

Floor levelling compound

Saint-Gobain Weber‘s fibre-modified floor levelling compound is designed to offer fast and efficient renovation of existing floors, and floating floor construction, in domestic and commercial applications.

weber.floor 4310 fibre flow is a pump-applied screed formulated from special cements, aggregates, binders and chemical admixtures that can be applied at depths between 5 – 50mm. It is supplied as a casein-free pre-blended dry powder and is suitable for levelling concrete, lightweight concrete, wooden boards, existing tiles and under-floor heating systems.

weber.floor 4310 fibre flow can be covered after 1 – 3 weeks following installation, depending on layer thickness and drying conditions, with ceramic and terrazzo tiles, carpet, flexible floor coverings and parquet, and is suitable for heated and wooden floors.  The fibre-modified formulation improves durability and robustness.

After thorough cleaning, the substrate should be prepared with weber.floor 4716 primer to improve adhesion and prevent the formation of air bubbles.  For floating floors weber.floor 4945 fibre mesh is recommended.  Supplied in 25kg polythene-lined paper sacks the screed has a pot life of 20 minutes after adding water.  This high performance screed has low alkalinity and low emissions.

Professional applicators are invited to contact Weber for technical support and back up to ensure correct product specification and performance with on-site inspection, supervision and nationwide training.

About Dylan Garton

Dylan Garton is a co-founder, video producer and editor for the Skill Builder social media platforms.

Check Also

Rockwool Bridgend factory

Green Hydrogen to Be Trialled as a Power Source of the Future at Rockwool’s Bridgend Factory

Research into a new innovation in low-carbon technology will test the potential for the replacement of natural gas with green hydrogen in the manufacturing process of ROCKWOOL insulation at its Bridgend factory.

Leave a Reply

Your email address will not be published. Required fields are marked *