Nilfisk has launched a range of mid-range hot water pressure washers which feature a four wheel design which makes them easier to pull or push on uneven surfaces such as construction sites.
The low centre of gravity of the MH 3M & MH 4M models is enabled by the internal distribution of components making the manoevrable units easy to tip and steer from left to right. Transport is aided by a footplate at the rear of the unit.
The MH models are fitted with a new boiler system independently certified to be more than 92% efficient. In EcoMode the unit will not only maintain excellent performance but reduce fuel costs too.
Hot water power
Most of the time cold water delivered at pressure will clean applications satisfactorily. There are times however, often when oil or grease are present, that only hot water will do the job. The MH models are fitted with a new boiler system independently certified to be more than 92% efficient.
Cleaning with hot water has been proven to reduce cleaning time and therefore the associated labour cost. Whole life running costs, including purchase cost, labour, water, fuel and service elements demonstrate a saving of over 26% compared to cold water only.
Whether the application calls for cold or hot water however the option for instant detergent is only a button push away.
The new MH range delivers pump pressures up to 220 bar with both units featuring brass pump heads and 3 ceramic pistons. An easy to open cabinet provides direct access to the pump which is protected by a large inlet water filter.
The new design also incorporates a unique spray gun holder that prevents the gun from being damaged during transport. A turnable hook enables secure winding of the power cable whilst hose reels are easily mounted. A large storage box adds useful flexibility for the operator.