Save Thousands With This DIY Chimney Stack Repair

0
32

👇CHECK OUT OUR OTHER GUIDES
‘How To’ Playlist

Summary

🗠Preparation & Assessment: The presenter inspects the chimney stack and explains the damage. The cement pointing had failed due to frost, leading to loose mortar and bricks.

🔨 Chasing Out Mortar: The old mortar is removed using a grinder and chisel, ensuring a clean depth of 20-25mm for reporting.

🠠Lime vs. Cement: The issue with cement pointing is that it traps moisture, damaging the structure. Lime mortar (NHL 5) is selected for flexibility and durability.

🧱 Brick Replacement & Color Matching: New imperial-size bricks are chosen to match the existing structure for an aesthetically seamless repair.

🺠Pot Reinstallation & Flaunching: The old flaunching is removed, and the pots are checked for cracks. They are reset securely using slates for added support.

🔗 Structural Tying: To correct the chimney’s outward lean (15mm deviation), helical ties are installed into the brickwork to reinforce stability.

🗠Resin Bonding: The helical ties are embedded in resin and concealed under the pointing to blend with the original chimney.

🌧 Final Coating: A storm dry coating is applied to keep moisture out while allowing the chimney to breathe, preserving its longevity.

Insights Based on Numbers

📠20-25mm Depth: The mortar was carefully chiselled out to this depth, ensuring a solid repointing foundation.

🌡 15mm Lean: The chimney had shifted over time, necessitating structural reinforcement.

🔩 Every Fourth Course: Helical ties were installed at every fourth brick course to secure the structure effectively.