A slipped lead hip might not look dramatic from the ground, but once the lead moves down the roof, it can leave the timber exposed to the weather, and that is when the real trouble starts.
Roger repairs a slipped lead hip that had exposed the timber beneath, allowing rot to set in and water to enter the loft. The lead itself is still in good condition, so instead of ripping everything out unnecessarily, Roger reuses what can be saved, replaces the worst of the damaged timber and gets the roof back into the dry.
It is a practical old-roof repair that shows why visible defects should not be ignored, how leadwork can shift over time, and why knowing where to stop is often one of the hardest parts of the job.
Key Takeaways
• A slipped lead hip can expose the timber below and eventually lead to rot and leaks.
• The lead was still serviceable, so Roger reused it rather than replacing good material for the sake of it.
• Rotten timber needs cutting out and replacing where it can no longer support the lead properly.
• Wind lift, failed fixings and years of movement can all contribute to leadwork slipping.
• On older roofs, the skill is knowing what needs replacing and what can sensibly be left alone.
• The material cost can be small compared with the labour and experience needed to do the job properly.
KIT USED
Roughneck ROU61800 Slaters Hammer
https://amzn.to/3SKtvd2
Roughneck Pro Lead Dresser Roofing Tool
https://amzn.to/4vWCzKy
Sitefix Copper Nails
https://www.sig.ie/p/sitefix-copper-slate-nails-copper-nails-30-x-265mm-1000/a3101067
Lead Roofing Wood Core Roll (50mm x 2.4m Treated)
https://www.roofingsuperstore.co.uk/product/lead-roofing-wood-roll-50mm-x-24m-treated.html
#RoofRepair #Leadwork #Roofing #SkillBuilder
